Waves Native Restoration Bundle
Includes Z-Noise, X-Noise, X-Crackle, X-Hum, and X-Click for sonic restoration and noise reduction

With five intuitive state-of-the-art noise reduction tools, the Waves Native Restoration Bundle includes everything you need to revive damaged recordings. Whether you are rejuvenating old vinyl and shellac discs, protecting archival and field recordings, or fixing deteriorating film and television soundtracks, Restoration is the solution.


Z-Noise
Hiss happens. So does ground hum, computer noise, and any number of unwanted sonic artifacts. Bring on Z-Noise, and hear them disappear. Featuring real-time noise profiling, innovative transient preservation, and increased low-frequency resolution, Z-Noise truly is a revolution in noise reduction.

Z-Noise Features:
-5-Band Noise Profile EQ
-Enhanced low-frequency resolution and time sensitivity
-Monitor the entire output or just the noise
-Exclusive Extract mode creates noise profile from sources containing signal and noise
-Adaptive dynamic detection for noise that changes over time
-Up to 24bit 96kHz resolution
-Mono and Stereo components
-Supports RTAS, Audio Suite, VST, AU
-PC and Mac compatible

Z-Noise Controls:
-Threshold -60dB to +60dB
-Reduction 0 to 50
-Noise Reduction (NR) Meter -Inf. to 0dB
-Attack 0.01ms to 1,000ms
-Release 0.01ms to 5,000ms
-Transients 0dB to 30dB
-Knee 0 to 100
-5 Band Noise Profile EQ 
  -On/Off Per Band
  -Shape Low Shelf, High Shelf, Bell or Notch
  -Gain -30dB to +30dB
  -Frequency 30Hz to 22,016Hz
  -Q 0.26 to 6.5
  -Frequency Band Marker Graphic control over Frequency and Gain per band
-Noise Profile
  -Learn Captures Noise Profile from Noise selection
  -Extract Captures Noise Profile from Program Audio
-Adaptive Constantly Updates the Captured Noise Profile from Program Audio
-Optimize Punch, Normal or Smooth
-Analyzer Display Shows graphs for the Input Signal, Output Signal, Noise Profile and EQ Profile
-Monitor Audio or Difference
-Output Meter -30dB to 0dB with peak hold indicator


X-Noise
With simple, intuitive controls similar to those found on traditional dynamics processors, X-Noise is perfect for removing tape hiss as well as air conditioner and computer noise from individual tracks, complete mixes, or damaged recordings.

X-Noise Features:
-Real-time parameter control and monitoring
-Learn mode for Noise Profile creation
-Frequency-based spectral display
-Audio and Difference output monitoring
-Up to 24bit 96kHz resolution (TDM 24/96 Mono only)
-Mono and Stereo components
-Supports TDM, RTAS, Audio Suite, VST, AU
-PC and Mac compatible

X-Noise Controls:
-Threshold -20dB to +50dB
-Reduction 0 to 100
-Dynamics
  -Attack 0ms to 1,000ms
  -Release 0ms to 5,000ms
-High Shelf 
  -Frequency 400Hz to 20,000Hz
  -Gain -30dB to +30dB 
-Resolution Low, Medium or High
-Noise Reduction Meter -Inf to 0dB with peak hold indicator
-Learn Captures the noise profile
-Output Meters -30dB to 0dB with peak hold indicator
-Monitor Mode Audio or Difference


X-Crackle
X-Crackle employs the latest psycho-acoustic algorithms to remove crackles and surface noise from vinyl records and damaged recordings, with results equal to or better than more expensive dedicated hardware solutions.

X-Crackle Features:
-Audio and Difference output monitoring
-Frequency-based Visual Scope display
-Real-time track insert capability
-Double precision bit resolution processing (Native)
-Up to 24bit 96kHz resolution (TDM 24/96 Mono only)
-Mono and Stereo components
-Supports TDM, RTAS, Audio Suite, VST, AU
-PC and Mac compatible

X-Crackle Controls:
-Threshold 0 to 100 for targeting crackles
-Reduction 0 to 100
-Attenuation Meter 0dB to -inf with peak hold indicator
-Output Meter -30dB to 0dB with peak hold indicator
-Monitor Mode Audio or Difference


X-Hum
Featuring a friendly interface that’s a snap to learn and use, X-Hum uses eight harmonically linked notch filters to attenuate ground loop hum, DC offset, and low-frequency rumble caused by turntables and tape machines.

X-Hum Features:
-8 Harmonic Notch Filters
-Frequency and Amplitude attenuation display
-Audio and Inverse monitoring
-Up to 24bit 96kHz resolution
-Mono and Stereo components
-Supports TDM, RTAS, Audio Suite, VST, AU
-PC and Mac compatible

X-Hum Controls:
-High Pass
  -On/Off
  -Filter Type -12dB/Oct or -24dB/Oct
  -Frequency 4Hz to 100Hz
-Notch Filters
  -Frequency 20Hz to 400Hz fundamental frequency
  -Q 3 to 60 global Q factor
  -Link Linked (all), Odd – Even or Unlinked
  -Gain -60dB to 0dB per harmonic filter
-Output Gain Fader -50dB to 0dB
-Output Meter 30dB to 0dB with peak hold and clip indicators
-Monitor Mode Audio or Inverse


X-Click
Ideal for restoring vintage vinyl and shellac records, X-Click removes strong transient noise like clicks, spikes, switching noise, and digital crosstalk while preserving the sonic integrity of your source material.

X-Click Features:
-Visual Scope displays intensity of clicks
-Audio and Difference monitoring
-Real-time track insert capability
-Double precision bit resolution processing (Native)
-Up to 24bit 96kHz resolution (TDM 24/96 Mono only)
-Mono and Stereo components
-Supports TDM, RTAS, Audio Suite, VST, AU
-PC and Mac compatible

X-Click Controls:
-Threshold 0 to 100
-Shape 0 to 100
-Attenuation Meter -inf to 0dB with peak hold indicator
-Output Meter -30dB to 0dB with peak hold indicator
-Monitor Mode Audio or Difference

Waves Native Restoration Bundle System Requirements:
-PC
  -Operating System WinXP 32-bit SP2, or Vista Business 32-bit, or Vista Ultimate 32-bit
  -Processor Intel Pentium 4 2.8GHz or AMD Athlon 64 or equivalent
  -RAM 1 GB on XP,  2 GB on Vista
  -Screen Resolution 1024x768 32-bit
-Mac
  -Operating System OSX 10.4.11 - 10.5.6
  -Processor G5 Dual 2Ghz
  -RAM1 GB
  -Screen Resolution 1024x768
-Intel-based Mac
  -Operating System OSX 10.4.11 - 10.5.6
  -Processor Core Duo 1.83Ghz
  -RAM 1 GB
  -Screen Resolution 1024x768

Sample Rate Support:
-Z-Noise  96 kHz
-X-Noise  96 kHz
-X-Click  96 kHz
-X-Crackle  96 kHz
-X-Hum  96 kHz