Waves TDM V-Series Bundle - 4 legendary hardware devices in 3 state-of-the-art Vintage models

Waves TDM V-Series Bundle

The Waves TDM V-Series Bundle combines 4 legendary hardware devices in 3 state-of-the-art Vintage models that capture the sound of the consoles found in the world's most exclusive recording studios. The big budget sound in your own studio.

V-Comp
Using a fixed nominal output gain and time constants, the V-Comp recreates the rich lush buss sound of the vintage 2254 hardware compressor. This super-responsive dynamics processor packs a recognizable musical punch heard on countless hit records.
-Input - Adjusts input level -24 dB to +18 dB in 0.1 dB increments.
-Output - Sets the output level, continuously adjustable ±18 dB.
-Meter switch - Selects mode of meter display: Input; Output or Gain Reduction
-Meter Display - Displays input, output, or gain reduction levels.
-Analog Switch - Controls the relative amount of analogue modeling.
Settings: Off, 25%, 50%, 100% (full analog modeling)
-Compress - Turns the compressor on and off.
-Ratio - Sets the compression ratio of the compressor.
Settings: 1.5:1, 2:1, 3:1, 4:1, 6:1
-Release - Sets the release time of the compressor.
S ettings: 400ms, 800ms, 1.5s, Auto.
-DeEsser - Turns the compressor into a simple de-esser.
-Limit - Turns the limiter on and off.
-Limit Level - Sets the threshold of the limiter, adjustable from +4 dBu to +12 dBu in 0.5 dB steps.
-Attack - Adjusts the attack speed of the limiter, fast = 1 microsecond; slow = 1 millisecond
-Release - Adjusts the release time of the limiter
Settings: 100 ms, 200 ms, 800 ms, Auto

V-EQ3
Combining the best characteristics from two of the world's most desirable console modules, the 1073 and 1066, this 3-Band EQ, with its classic cutoff points and adjustable High Pass Filter, is ideal for mixing and mastering. With the V-EQ3, it's never been easier to achieve the rich classic sound of the ‘60s and ‘70s.
-HP - High Pass Filter gain and cutoff; Gain: up to -18 dB/octave; 7 cutoff points (Hz): 45, 50, 70, 80, 160,
300, 360
-EQL - Equalizer on/off switch
-PHASE - Reverses output signal phase
-LF - Low Frequency gain and cutoff; Continuously adjustable gain: up to ±18 dB; 5 cutoff points (Hz): 35, 60,
100, 110, 220; Slope: ±18 dB per octave
-MF - Middle Frequency gain and cutoff; Continuously adjustable gain: up to ±18 dB; 9 cutoff points (kHz): 0.36,
0.70, 1.2, 1.6, 3.2, 3.8, 4.8, 7.0, 7.2
-HF - shelf filter gain and cutoff; variable gain: ±18 dB ; cutoff points: 10 kHz or 12 kHz
-OUTPUT - Controls output level in 0.1 dB increments from -18 dB to +18 dB
-TRIM METER / RESET - Displays peak output in dBFS, resets Trim
-ANALOG - Analog modeling on/off

V-EQ4
Modeled on the highly sought-after 1081 console module, this classic 4-band equalizer features detailed high frequency boosts plus High Pass and Low Pass Filters. The V-EQ4 captures the characteristic sound of vintage analog gear while providing the limitless flexibility and versatility of the digital environment
-LP/HP - Selectable Lowpass or Highpass filter
5 HP cutoff points (Hz): 27, 47, 82, 150, 270
5 LP cutoff points (kHz): 18, 12, 8.7, 5.6, 3.9
-LF - Low Frequency gain and cutoff
Switchable between shelf (default) and bell
Continuously adjustable boost/cut up to ±18 dB
5 cutoff points (Hz): 33, 56, 100, 180, 300
Slope: ±18 dB per octave
-EQ - Equalizer on/off switch
-PHASE - Reverses output signal phase
-SHELF/BELL - Sets the LF and HF curve shapes
-LMF - Low middle frequency gain and cutoff
High Q Bell continuously adjustable gain ±18 dB
10 cutoff points (Hz): 220, 270, 330, 390, 470, 560, 680, 820, 1000, 1200
-Hi-Q - Sets LMF or HMF bell curves to a higher Q (LMF ±12dB / HMF ±18dB)
-HMF - High Middle Frequency gain and cutoff
High Q Bell gain adjustment, continuously adjustable ±18 dB
9 cutoff points (kHz): 1.5, 1.8, 2.2, 2.7, 3.3, 3.9, 4.7, 5.6, 8.2
-HF - High Frequency filter gain and cutoff
Switchable between shelf (default) and bell
Continuously variable gain ±18 dB
5 cutoff points (kHz): 3.3, 4.7, 6.8, 10, 15
-OUTPUT - Controls output level in 0.1 dB increments from -18 dB to +18 dB
-TRIM METER / RESET - Displays peak output, measured in dBFS, resets Trim
-ANALOG - Analog modeling on/off

veq4

Waves TDM V-Series Bundle System Requirements:
PC
-WinXP 32-bit SP2, Vista Business 32-bit, Vista Ultimate 32-bit
-Intel Pentium 4 2.8GHz / AMD Athlon 64 or equivalent
-RAM 1 GB on XP, 2 GB on Vista
-Screen Resolution 1024x768 32-bit

Mac
-OS-X 10.4.11 or OS-X 10.5.3
-G5 Dual 2Ghz
-1 GB RAM
-Screen Resolution 1024x768

Intel-based Mac
-OS-X 10.4.11 or OS-X 10.5.3
-Core Duo 1.83Ghz
-1 GB RAM
-Screen Resolution 1024x768