TC Electronic Helicon VoiceTone Harmony M
Vocal Harmony & Effects for Keyboardists

The TC Electronic Helicon VoiceTone Harmony M just may be the smartest vocal harmony and effects device you’re likely to plug your mic and MIDI keyboard into. Harmony M simultaneously gives you two backup harmony singers and realistic vocal doubling with effortless MIDI control. Also included are the live engineer effects that automatically optimize your vocals with adaptive compression, EQ and de-essing. And all of this feeds into rich reverb and delay processors. While you focus on your music, Harmony M backs you up with fully produced vocal sound.

TC Electronic Helicon VoiceTone Harmony M Features:
-Two voice 4th generation intelligent harmony
-Separate Double effect using overdub algorithm
-Tone switch engages adaptive Live Engineer Effects
-6 factory reverb/delay combinations for rich vocals
-10 presets each with A/B location
-Harmony Arrangement algorithm listens to MIDI input and voice to follow your music
-Flexible harmony voicing including unique bass setting
-Includes classic ”Notes” and ”Chord” harmony control modes
-1⁄4” TRS mic level I/O in stereo or mono
-Clean, studio quality mic preamp with phantom power
-MIDI input
-Input for optional footswitch allows Harmony M placement on keyboard

Feel like you’re wrestling with others over your sound? From the moment you plug your mic into the TC Electronic Helicon VoiceTone Harmony M you’re in control of the tone and effects on your voice. Harmony arrangementalgorithms follow your playing and singing to provide musically correct harmony. With the straightforward controls it’s easy to step through presets and switch between A/B user settings.

Quality can be witnessed in every aspect of VoiceTone design. Studio caliber audio algorithms, transparent converters and fastidious analog audio design lead to a smooth sound that makes you want to sing your best while your fans get, well, fanatic. It just wouldn’t be enough to make products that sound this good without making sure they stand up to the rough treatment they’re going to get onstage or kicking around a rehearsal room floor.

TC Electronic Helicon VoiceTone Harmony M Technical Specifications:
-Inputs
  -Mic Connector: Balanced XLR, Input Impedance 1kOhm
  -Mic Input Sensitivity @ 0dBFS -44dBu to +2dBu
  -Mic Input Sensitivity @ 12dB headroom -56dBu to -10dBu
  -EIN -126dBu @ max. mic amp gain, Rg = 150 Ohm
  -MIDI In Connector: Standard 5 pin DIN
  -Footswitch In: 1/4” 3 conductor phone jack
  -Power Input: 12 VDC 300 mA, tip negative
-Analog Outputs
  -Main Output Connectors: Balanced TRS 1/4” jacks
  -Output Impedance: 40 Ohm
  -Output Level: +14 dBu @ 0dBFS
-Input to Output Analog Audio Performance
  -Dynamic Range, Mic. @ Min gain >108dB, 20 Hz - 20kHz *A-weighted
  -Dynamic Range, Mic. @ -18dBu sensitivity > 104dB, 20hz - 20kHz*
  -THD+ Noise, Mic. @ Min gain <-90dB
  -Frequency Response, max gain -1.5dB @ 40 Hz, +0/-0.3 dB (200Hz to 20 kHz)
-Conversion Characteristics
  -Sample Rate 48 kHz, Converter AKM AK4620B
  -AD / DA Conversion 24 bit, 128x oversampling bitstream
-EMC & Safety
  -Complies with EN 55103-1 and EN 55103-2 FCC part 15, Class B, CISPR 22, Class B
  -Certified to IEC 65, EN 60065, UL6500 and CSA E60065 CSA FILE #LR108093
-Environment
  -Operating Temperature 32° F to 122° F (0° C to 50° C)
  -Storage Temperature -22° F to 167° F (-30° C to 70° C)
  -Humidity Max. 90 % non-condensing
-Dimensions 130mm x 132mm x 41mm (5" x 5.25" x 1.5")