Rolls RA62c 6 Channel Pro Headphone Amp

The Rolls RA62c 6 Channel Pro Headphone Amp is a six-channel headphone/earphone amplifier for professional audio monitoring. A variety of input options are available including 1/4", RCA, and balanced XLR.  Since the MONO/STEREO switch is after the pan control, it will mix 2 MONO signals and their balance can be adjusted with the Pan control. With the addition of rear panel Direct Input connectors, each channel may mix a second stereo signal.

Rolls RA62c 6 Channel Pro Headphone Amp Features:
-Six Channels of clean, quiet headphone/earphone amplification.
-Individual Direct Inputs to mix separate stereo signal with Main Input signals.
-1/4" and 3.5mm Headphone/Earphone Outputs.
-LED Clip indication.
-Stereo/Mono operation

Rolls RA62c 6 Channel Pro Headphone Amp Specifications:
-Input Impedance: 10K Ohms unbalanced
-Max Input Level: +18 dBV
-Input Connectors:
  -1/4" TRS stereo
  -R & L bal. / unbal. 1/4"
  -RCA
  -R & L balanced XLR
  -6: 1/4" TRS Direct Input jacks
-Output Connectors:
  -12: 1/4" TRS Stereo jacks
  -6: 1/8" (3.5 mm) TRS Stereo jacks
-Max Gain: 20 dB/Channel
-Max Output Power: up to 300 mW/side, 600 mW/Channel ( @ 16 Ohms )
-Frequency Response: DC - 30 kHz
-S/N Ratio: 90 dB
-THD: <.008%
-IMD: <.008%
-Phase Shift (In to Out): 0 deg.
-Slew Rate: 25 V per microsecond Second
-Crosstalk: - 65 dB
-Power: 12 VAC (Rolls Model PS12)
-Size: 19" x 1.75" x 6.5" (48cm x 4.5cm x 17cm)