Nomad Factory PulseTec EQs

To create the Nomad Factory PulseTec EQs, Nomad digitaly recreated the legendary Pultec Program Equalizer EQP-1A and the Pultec Mid-Range MEQ-5 into a single high quality plug-in, sections can be enabled or disabled individually.  Designed to improve the quality of digital sound recordings, add that 'Final Touch' for mastering or to body and presence to you recorded tracks.

The PulseTec EQs includes the legendary Pultec Mid-Range Equalizer MEQ-5 and the well known Pultec Program Equalizer EQP-1A into a single high quality plug-In, the PulseTec EQs. The PulseTec EQs sections can be enabled or disabled individually or used simultanous for full range analog equalizations. We added an analog Pre-Amp section which adds an Input Level and Output Level controls as well as a simple 'Clipper' limiter at the master output section.

The PulseTec MEQ-5 Mid-Range Equalizer section is designed to add Body and Presence to your recorded tracks, Highlight or Subdue a vocalist where the vocal is already mixed with the orchestra, improve the quality of voices by alternating their fundamental and overtone relationships.

The PulseTec EQP-1A Equalizer section will add a wide range of equalization curves provided makes it possible to boost the very low or very high frequency notes of the orchestra without 'muddying up' the middle register instruments. Continuously variable controls permit changing the amount of the equalization or sustained tones without step in level or noise.

Nomad Factory PulseTec EQs Features
-PulseTec MEQ-5 section modeled from the legendary Pultec Mid-Range MEQ-5
  -Vintage Switch - Designed to add the 'Soul' of the original hardwarewe used for modeling.
  -(Low) PEAK Boost - 200, 300, 500, 700, 1000 Hz; 0 to 10 dB
  -(High) PEAK Boost - 1.5, 2, 3, 4, 5; 0 to 8 dB
  -(Mid) DIP Atten - 200, 300, 500, 700 Hz and 1.5, 2, 3, 4, 5, 7 kHz; 0 to 10 dB
  -On/Off Switch (Bypass)
-PulseTec EQP-1A section modeled from the legendary Pultec Equalizer EQP-1A
  -Vintage Switch - Designed to add the 'Soul' of the original hardwarewe used for modeling.
  -20, 30, 60, 100 Hz cps Shelf Boost, 0 to 13.5 dB
  -20, 30, 60, 100 Hz cps Shelf Attenuate, 0 to 17.5 dB
  -3, 4, 5, 8, 10, 12, 16 kcs Peak Boost, 0 to 18 dB
  -Peak Boost Bandwidth; 0 (Sharp) to 10 (Broad)
  -5, 10, 20 kcs Shelf Attenuate, 0 to 16 dB
  -On/Off Switch (Bypass)
-Pre-Amplifier PRE-2S
  -Clipper Switch - Overload 'Clipper' softknee limiter
  -INPUT -18 to +18 dB input level control
  -OUTPUT -18 to +18 dB output level control
  -Vintage VU Meters with IN/OUT selector
  -On/Off Switch (Bypass the PulseTec EQs)

Compatible with:
-Windows 7, XP, Vista (32 bit and 64 bit) and Mac OS X (Intel & PPC) supported
-VST, AU and RTAS/AS supported
-24 bit / 192 kHz supported

Nomad Factory PulseTec EQs System Requirements:
Apple Minimum Requirements :
Macintosh® Intel Core Solo® 1.5GHz with 1Gb of RAM.
Mac OS X 10.5 Leopard and Mac OS X 10.6 Snow Leopard.
Compatible Intel Macs, PPC are not supported.
 
Apple Compatibility :
AudioUnit - RTAS (Pro Tools) and VST plug-ins.
32-bit and 64-bit are supported.
You can authorize our software on up to 3 computers with a simple one-click authorization procedure (no dongle key required).
 
Windows Minimum Requirements :
Pentium® iV 2GHz / Athlon™XP 2GHz with 1Gb of RAM.
Windows 7 - XP - Vista are supported (32-bit and 64-bit).
 
Windows Compatibility :
VST and RTAS (Pro Tools) plug-ins.
32-bit and 64-bit are supported.
You can authorize this software on up to 3 computers with a simple one-click authorization procedure (no dongle key required).