EMU PIPEline Wireless Transmitter Receiver System

The EMU PIPEline Wireless Transmitter Receiver System frees you from the tyranny of audio cables without sacrificing audio quality.  The PIPEline can be used as a wireless transceiver for your guitar or keyboard, or as the basis of a wireless In-Ear monitoring system for your band.  Because latency is so critical in music performance, PIPEline has a minimal delay of only 5.5ms so it won't interfere with the feel of your music.

EMU PIPEline Wireless Transmitter Receiver System Features:   
-Mobile wireless transmit or receive
-Each Pipeline can be configured as a transmitter or receiver for ultimate flexibility
-Better than CD Quality Digital Audio
-Audiophile quality sound with 48kHz sample rate and 96dB signal-to-noise ratio.
-Low Latency
-Unlike other wireless transceivers with long latency of 20ms, the EMU pipeline offers low latency so essential for live music applications.
  5.5ms in dedicated pairing mode, and 10ms in broadcast mode. 
-15 Meter (49 feet) Range
-Pipeline has Extended Audio Range Reception (EARR) to give you even more freedom
-Long Battery Life (up to 10 hrs receive)
-The rechargeable battery lasts up to 10 hours in receive mode and 6 hours in transmit mode. Because each unit can be either a
  transmitter or receiver, you can swap units between sets and always have a fresh charge.
-Analog/Digital inputs or outputs
-The audio Flexi-Jacks can be configured as inputs or outputs and they can also be setup to send or receive analog or digital S/PDIF -
  whatever type of connections you need.
-Broadcast mode allows one transmitter and multiple receivers
-In this mode, one transmitter can broadcast to multiple receivers. Pipeline to be used as an "In-Ear" monitor system for your band, or
  broadcast to a class of students using headphones.
-Pairing mode connects one transmitter to one receiver
-In pairing mode, you can have up to three independent transmitter/receiver pairs. You could have three wireless instruments, or set up
  any three of the home applications. You could also use two channels for wireless instruments and use the third channel in broadcast mode
  for your In-Ear monitors.
-Easy to setup and use
-Power adapter/charger and cables included
-I/O Configuration   
  -Two RCA Flexi-Jacks can be configured either as inputs or outputs
  -The two RCA Flexi-Jacks can also be configured either as analog or digital (S/PDIF 48kHz)

With PIPEline connected to your instrument, you'll be able to move freely in a 15 meter range from the receiver. If your other band mates want to join the wireless revolution, they can, because PIPEline has three independent stereo channels. Each instrument stays completely independent with zero crosstalk.

Have you always wanted an In-Ear monitoring system, but couldn't justify the high price? EMU PIPEline Wireless Transmitter Receiver System is the perfect solution for low-cost In-Ear monitoring. Because PIPEline has three channels, you can have three separate stereo monitor mixes, or one transmitter can send a group mix to multiple receivers.

PIPEline's Audio quality is superb with no-compression and a 48kHz sample rate (better than CD). Encryption key handshaking between transmitter and receiver eliminates the possibility of picking up other wireless sources.

Because EMU PIPEline Wireless Transmitter Receiver System works with ANY audio device, you can wirelessly connect any of your other audio gear. For example, you could connect your iPod/Mp3 player (or computer) to your stereo system, or put remote speakers in another room of your house without the hassle of routing speaker wires.

EMU PIPEline Wireless Transmitter Receiver System Specifications :
-Connectivity
  -Audio Line In/Out - 3.5 mm (1/8") Stereo jack
  -S/PDIF 48kHz or RCA Audio Line In/Out
-Audio Performance
  -Frequency Response: 20Hz-20kHz +/- 0.15dB
  -Signal-to-Noise Ratio (SNR) 98dB (typical)
  -Latency: 5.5ms in Dedicated Pairing Mode, 10ms in Broadcast Mode
-Rechargeable Battery
  -Battery Life: 5 to 8 hours (typical)
  -Charge Time: 3 hours (typical)
-Power Adapter
  -Supply Voltage: 5V
  -Current: 1A
  -Power: 5W
  -Tip=Positive
-Radio Frequency
  -Operating RF range: 2400 - 2483.5 MHz
  -Number of RF channels: 3
  -RF transmitter power output: 16 dBm (typical)
-Retail Box Contents
  -PIPEline transceiver module
  -Universal Power Adapter
  -Stereo 1/8" mini to dual mono RCA cable
  -¼" male mono to dual mono RCA cable
  -Silicon skin with belt/strap clip
  -User's Guide

EMU PIPEline Wireless Transmitter Receiver System System Requirements:
-AC Power 100/240V
-2 PIPElines are required, one as a transmitter & one as a receiver