Emes Pink TV Active
the perfect reproduction tool when sonic quality is required in video, broadcast or project studios

The Emes Pink TV Active Pair is the 'little work horse' from the EMES product line offering amazing performance in an incredibly small size. The Emes Pink TV Active Pair is the perfect reproduction tool when sonic quality is required in video, broadcast or project studios.

The Emes Pink TV Active Pair is equipped with two identical 80W amplifiers (Lf/Hf) matched drivers and basic controls - dip switch for sensitivity, bass, and Hf-control. You can be sure you are getting the best reproduction experience.

A pair of Emes Pink TV Active monitors only weigh 10Kg. (22lbs.) making them ideal for a personal reference system. Take them along wherever you go!

Combined with the AMBER active, you can create a 3-way monitoring system.

Emes Pink TV Active Pair Specifications

• Drivers: LF= 14cm paper carbon, HF = 25mm textile Neodyme
• FC response: 58 - 19.000 Hz (±2.5 dB)
• Sensitivity: 89 dB 1W/1m at 0.4% THD
• Sensitivity max: 108 dB
• Power handling rms: 2 x 70W LF/HF
• Power handling peak: 2 x 80W LF/HF
• Dimension: 290 x 170 x 200mm (11.5"x 6.75"x 7.75")
• Weight: 5.0 Kg (11 lbs.)
• Special: LF & HF coils are time aligned on all axis
• 4x4 dip-switches for level, bass and HF-level-control
• Listening distance: 80cm - 250cm. (3 - 8 feet)
  

The System

The Emes Pink TV Active Pair uses the bass-reflex principle. A 25mm neodymium dome driver is mounted from the back to the baffle, leading into a radial wave guide. This guarantees a perfect polar pattern, low distortion and smooth linearity over a wide range. The liquid front design (srew-, bump-, dipless) supports all the emanated energy without disturbance. Two identical 80W amplifiers are used in the High and Low frequency section. The Emes 'little' Pink tv active has all the design features that are offered in larger models.

Emes Pink TV Active Pair Driver Technology

In the Low Frequency section a shielded 14cm driver is used. Emes chose this driver because of the outstanding acceleration performance, meaning it can deliver a real punch! The membrane is a composite made from paper, fiberglass and Kevlar. This keeps the membrane as stiff as possible, while still being very light in weight. The high-tech mechanical 'air flow design' nearly eliminates air compression inside the driver itself. The 25mm neodymium tweeter is a masterpiece - total weight is only 300 grams and still performs like a big one!

The Electronics

Two complete separated channel strips are used to keep the electronic crosstalk to a minimum. Each of these have identical amplifiers the tweeter has the same amount of power in the back as the woofer 2 x 80W peak. Emes s.c. 'quick delivery' digital power supply is built to works 2.000 times faster than typical analog devices. Located on the back are 16 step dips for the input sensitivity, for low fc control (-6 to + 4 dB), and the hf-section (-4 to +4 dB.)