Korg MR2000s DSD Rackmount Studio Recorder

Korg captured the world's attention with their MR series of DSD mobile recorders. After consulting with top recording and mastering professionals, Korg has now created the Korg MR2000s DSD Rackmount Studio Recorder, designed from the ground up to bring that same DSD sonic performance home for use in any studio environment.

In keeping with the MR Series' heritage of portability, the MR2000S adds a number of new features to meet the requirements of the most demanding studio, yet retains a sleek, single rack-space profile. This compact format is also ideal for any live recording rig; or for grabbing that "off-the-board" live recording night after night – as well as shuttling your recordings from venue to studio and back again. So whether you want to capture that once-in-a-lifetime performance with impeccable detail, or need to transfer those priceless recordings from session to session, the MR2000S is ready to roll.

Korg MR2000s DSD Rackmount Studio Recorder Specifications:
-Recorder section
  -Number of tracks: 2 tracks, 2 tracks simultaneous playback/2 tracks simultaneous recording
-Recording formats
  -PCM audio format: BWF (extension .wav) 44.1 kHz @ 16/24 bit, 48 kHz @ 16/24 bit, 88.2 kHz @ 24 bit, 96 kHz @ 24 bit,176.4 kHz @
    24 bit, 192 kHz @ 24 bit
  -1-bit audio format: 2.8 MHz @ 1-bit, 5.6 MHz @ 1-bit,DSDIFF format (extension .dff), DSF (extension .dsf),WSD (extension .wsd)
  -MP3 audio format(playback only): 44.1kHz/32kbps - 320kbps
-Recording
  -Maximum approximately: 120 hours at 44.1 kHz/16 bit, 14.5 hours at 5.6 MHz/1- bit (for 80 Gbyte hard disk), Maximum continuous
    recording 6 hours
  -Number: Recognizes a maximum of projects four hundred projects of each format
  -Mark points: 100 points per project *No mark names
  -USB functionality: Connect to computer via USB 2.0, usable as FAT32 USB external drive
  -Project editing: Rename, Delete, Protect
-General
  -Display: 160 x 104 pixel, LCD with backlight
  -Level meter: -54dBFS – 0dBFS (PC audio); -54dBSACD – +3dBSACD (1-Bit audio); L and R each provide 21/23-step LED + peak LED
  -Power supply: AC100 –240 V
  -Power consumption: 20 W
  -Dimensions/Weight: 18.9"(W) x 8.6"(D) x 1.7"(H):Including protrusions/6.17 lbs
-Main Specifications
  -Frequency response: 10 Hz ... 20 kHz ± 1 dB@ Fs 44.1 kHz / 48 kHz, 10 Hz ... 40 kHz ± 1 dB@ Fs 88.2 kHz/96 kHz/176.4 kHz/ 192 kHz,
    10 Hz ... 100 kHz (1-bit)
  -S/N: 103 dB (typical) @ IHF-A
  -THD+N: 0.005% (typical), 20 Hz ... 20 kHz
  -A/D conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
  -D/A conversion: 2.8224 MHz/5.6448 MHz(1-bit), 24bit (PCM)
-Line In L/R
  -XLR
    -Connector: XLR-3-31 type (balanced)
    -Input impedance: 22 k?
    -Nominal level: + 4 dBu (REC LEVEL=0dB)
    -Maximum level: + 24 dBu
  -RCA
    -Connector: RCA (Unbalanced)
    -Input impedance: 50k?
    -Nominal level (– 12 dBFS – 12 dB-SACD):
    –6 dBV (REC LEVEL = 0 dB)
    -Maximum level: + 10 dBV
-Line Out L/R
  -XLR
    -Connector: XLR-3-32 type (balanced)
    -Load impedance: 600 ? or greater
    -Nominal level: – 4dBu
  -Maximum level (0dBFS 0dB-SACD):
    -16 dBu (Nominal level= –12dBFS),
    -18 dBu (Nominal level= –14dBFS),
    -20 dBu (Nominal level= –16dBFS),
    -22 dBu (Nominal level= –18dBFS),
    -24 dBu (Nominal level= –20dBFS)
  -RCA
    -Connector: RCA (Unbalanced)
    -Load impedance: 47 k? or greater/
    -Nominal level (– 12 dBFS – 12 dB-SACD):
      -6 dBV (REC LEVEL=0dB)
    -Maximum level (0 dBFS 0 dB-SACD): + 6dBV
-Phones
  -Connector: 1/4" stereo phone jack
  -Load impedance: 16 ? or greater
  -Maximum level: 170 mW + 170 mW @ 32 ?
-S/P Dif In/Out (coaxial)
  -Connector: RCA pin
  -Format: IEC60958
-Word Clock In/Out
  -Connector: BNC receptacle, 75 ?
-USB
  -Connector: Type B
  -Format: USB 2.0 compliant,
  -USB mass storage class
-Supported operating systems: Windows 2000,or later Mac OS X 10.3.9 or later
-Included Items
  -AC power cable,
  -Install CD ("AudioGate" audio file conversion application)

AudioGate 1.5 System Requirements:
-Windows
  -XP Home Edition/Professional Edition Service Pack 1 or later, Microsoft Windows Vista
  -CPU: Intel Pentium III /1 GHz or better
  -RAM: 256 MB or more
  -A USB port that meets the operating requirements of Microsoft Windows XP/Vista
-Macintosh
  -Mac OS X 10.3.9 or later
  -CPU: Apple G4/800 MHz or better, Intel Mac is supported
  -RAM: 256 MB or more
  -A USB port that meets the operating requirements of Mac OS X

*This product comes installed with the "ISC-MP3 BF532 d Korg" MP3 decoder which was developed by The Institute of Super Compression Technologies, Inc. (ISCT), Japan.

*”DSD” is a registered trademark.

*Logos, product names, and company names are their trademarks or registered trademarks.

Specifications subject to change without notice