Nomad Factory Liquid Bundle II Individual Plugins

The 6 plugins from the Liquid Bundle II are now available individually.  Just choose how many of the Nomad Factory Liquid Bundle II Plug-ins you want from the drop-down box above.  Specify the names of the plugins you want in the Additional Information box when ordering. 

Please Note:  You can only buy up to 3 individual plug-ins here.  If you want to buy 4 or more Plug-ins, just buy the Liquid Bundle II, it's cheaper.

 Liquid Compressor II

Liquid Compressor II
The Liquid Compressor II pumps up your sound and keeps your dynamics in check. The Liquid Compressor II can add depth and sustain to your sound while helping you cut through a mix. Easy-to-use modern interface with gain reduction light-meter. It is offered in Mono and Stereo.
-Variable Attack and Release times.
-Threshold and Ratio compression with Soft/Hard Knee selector.
-Internal Side Chain High and Low Pass Filters with Listen key and Bypass button.
-Peak and RMS modes.
-Brick-Wall Peak limiter.
-Easy-to-use modern interface with gain reduction light-meter.
-Windows 7, XP, Vista (32 bit and 64 bit) and Mac OS X (Intel & PPC) supported
-VST, AU and RTAS supported
-24 bit / 192 kHz supported

 Liquid Delays II

Liquid Delays II
The Nomad Factory Liquid Delays II is a filtered dual-delay effect plug-in, featuring two delays, resonant filters, tube saturation-overdrive, peak-limiter and LFO. The Liquid Delays II is capable of clean-delays, dirty-delays, filtered-delays, and more. From basic synced delays to dirty, grungy, distorted delayed filters, the Liquid Delays II can create amazing effects.
-LFO Rate and Depth controls.
-Sync to the host's tempo.
-Dual Delay using notation values controls.
-HP and LP filters controls.
-Overdrive control.
-Input level, Ouput level and Mix controls.
-Easy-to-use modern interface with LFO light-meter.
-Windows 7, XP, Vista (32 bit and 64 bit) and Mac OS X (Intel & PPC) supported
-VST, AU and RTAS supported
-24 bit / 192 kHz supported

 Liquid Gate II

Liquid Gate II
The Liquid Gate II tames the noise floor so that you hear only the audio you want to keep. This fully adjustable gate/expander allows control of Threshold, Attack Time, Hold Time, Release Time and Range. To help the gate decide when to open, you can use the two Filter controls (Side Chain). Easy-to-use modern interface with gain reduction light meter. It is offered in Mono and Stereo.
-Variable Attack, Hold and Release times.
-Threshold and Range.
-Internal Side Chain High and Low Pass Filters with Listen key and Bypass button.
-Peak and RMS modes.
-Easy-to-use modern interface with gate reduction light-meter
-Windows 7, XP, Vista (32 bit and 64 bit) and Mac OS X (Intel & PPC) supported
-VST, AU and RTAS supported
-24 bit / 192 kHz supported

 Liquid Mod II

Liquid Mod II
Chorus and Flanger effects operate on a very similar basis, that's why they were both implemented in the Liquid Mod II. The Liquid Mod II produces vintage tape flanging, gentle choruses, sharp phasing, phaser-emulation effects and a variety of dual-delay-modulation sounds quickly. It has the character of a vintage chorus-flanger unit using modern features options.
-Chorus or Flanger effects.
-Analog or Digital processing modes.
-LFO Rate and Depth controls.
-Sync to the host's tempo.
-Feedback control.
-Overdrive control.
-Ouput level and Mix controls..
-Easy-to-use modern interface with LFO light-meter.
-Windows 7, XP, Vista (32 bit and 64 bit) and Mac OS X (Intel & PPC) supported
-VST, AU and RTAS supported
-24 bit / 192 kHz supported

 Liquid Phase II

Liquid Phase II
The Liquid Phase II emulates the sounds of classic analog phasers from the 70’s and 80’s. The Liquid Phase II provides a wealth of vintage and modern phasing effects. The selectable "Phaser Stage" control allows you to select any number of stages between 2 and 24 including all odd numbers. Using an odd number of stages sounds totally different than an even number of stages, this cool feature allows the Liquid Phase II to create unique phasing and modulation effects.
-LFO Rate and Depth controls.
-Sync to the host's tempo.
-Analog or Digital processing modes.
-Low and High frequency stages contour.
-Overdrive control.
-Ouput level and Mix controls.
-Easy-to-use modern interface with LFO light-meter.
-Windows 7, XP, Vista (32 bit and 64 bit) and Mac OS X (Intel & PPC) supported
-VST, AU and RTAS supported
-24 bit / 192 kHzsupported

 Liquid Verb II

Liquid Verb II
The Liquid Verb II Digital Reverb is a great professional reverb for music and post-production applications. From spacious concert halls to small rooms, the Liquid Verb II delivers professional-quality reverb and ambience processing to the most demanding studio sessions. Designed to be musical, the Liquid Verb II is easy to use with just a few controls and a simple modern interface.
-Small, Medium and Large reverberation times. (0.1 to 10 secs)
-Three band equalizer with Pre/Post reverberation.
-HP and LP Filters section (post reverberation).
-Pre-Delay and Reverb time (RT60)
-Wet and Dry level controls.
-Input and Output level controls.
-Easy-to-use modern interface.
-Windows 7, XP, Vista (32 bit and 64 bit) and Mac OS X (Intel & PPC) supported
-VST, AU and RTAS supported
-24 bit / 192 kHz supported

Nomad Factory Liquid Bundle II System Requirements:
-Mac
  -RTAS/AS, VST 2.4, AU - Universal Binaries
  -G4, G5 and Intel Macs with Mac OS 10.4, 10.5, 10.6 or later
  -512 MB RAM
  -1024 x 768 screen resolution
  -High quality audio interface with sample rates from 44 kHz to 192 kHz
-Windows
  -RTAS/AS, VST 2.4
  -Intel Pentium III or Pentium IV system with Windows 7, XP, or Vista (32 bit and 64 bit)
  -512 MB RAM
  -1024 x 768 screen resolution
  -High quality audio interface with sample rates from 44 kHz to 192 kHz

Macintosh and Windows Sequencers and Editors:
Sequencers and sound editors compatible with VST, RTAS/AS, AU plug-ins, such as Cubase, Nuendo, V-STack, Logic Audio, Digital Performer, Sonar, Sound Forge, Cool Edit Pro, Peak, Live, Pro Tools 7 TDM, Pro Tools 7 LE, Rax, AU Lab, WaveBurner, Garage Band, Adobe Audition, Tracktion, DSP-Quattro, Sagan Metro and any audio application that fully supports one of the above mentioned plug-in standards.

Authorization:
-Mac
  -OS X 10.5, 10.6 or later (PPC or Intel) - require Pace Interlok latest version
  -Challenge Response (hard disk)
  -iLok USB key
-Windows
  -7, XP, Vista (32 bit and 64 bit) - require Pace Interlok latest version
  -Challenge Response (hard disk)
  -iLok USB key

Sample Rates:
- Up to 192 kHz sample rates supported