Boss FBM1 Fender Bassman Pedal
Available to United States customers ONLY.
Fender amps of the ’50s and ’60s are beloved and coveted by guitarists around the world. Thanks to Boss’ technology and tone know-how, the Boss FBM1 Fender Bassman Pedal brings the natural, fat, rich, bright tone of the Fender Bassman to a Boss pedal. In conjunction with Fender, the new Boss FBM1 recreates the legendary tone of the 1959 Fender Bassman. Features include the same controls on the original Bassman: Presence, Treble, Mid, and Bass EQ controls. The FBM1 also functions perfectly as a “pre-gain pedal” placed before an already overdriven amp to add the tone character of the Bassman.
Boss FBM1 Fender Bassman Pedal Features:
-Recreates the legendary tone of the 1959 Fender Bassman amp
-Additional BRIGHT IN provides a brighter sound, similar to the original Bassman
-Presence, Treble, Mid and Bass EQ controls
-Road-tough Boss metal construction
-Perfect pre-gain pedal for adding or retaining Fender tone color
Boss FBM1 Fender Bassman Pedal Specifications*:
-Nominal Input Level -20 dBu
-Input Impedance 1 M ohm
-Nominal Output Level -20 dBu
-Recommended Load Impedance 10 k ohms or greater
-Controls
-Pedal switch, PRESENCE knob, MIDDLE knob, BASS knob, TREBLE knob, GAIN knob, LEVEL knob
-Indicator
-CHECK indicator (Serves also as battery check indicator)
-Connectors
-INPUT jack, BRIGHT IN jack, OUTPUT jack, AC adaptor jack (DC 9 V)
-Power Supply
-DC 9 V, Dry battery 6F22 (9 V) type (carbon), Dry battery 6LR61 (9 V) type (alkaline), AC Adaptor (PSA series: optional)
-Current Draw
-36 mA (DC 9 V)
-Expected battery life under continuous use
-Carbon: 3 hours, Alkaline: 10 hours * These figures will vary depending on the actual conditions of use.
-Accessories
-Owner's Manual, Leaflet (USING THE UNIT SAFELY, IMPORTANT NOTES, and Information), Dry Battery 006P/9V (6LR61)
-Dimensions
-Width 73 mm 2-7/8 inches
-Depth 129 mm 5-1/8 inches
-Height 59 mm 2-3/8 inches
*0 dBu = 0.775 Vrms
*The battery that is supplied with the unit is for temporary use, intended primarily for testing the unit's operation. Boss recommends that
alkaline battery be used when replacing the battery.
*Fender(R) and BASSMAN(R) are the trademarks of FMIC. All rights reserved.
*The specifications are subject to change without notice.