Digigram VX882E Multichannel Sound Card with BOB8 Breakout Box
Connector Cable Included

Digigram VX882E Multichannel Sound Card

The Digigram VX882E Multichannel Sound Card is a PCI Express version of the VX882HR linear sound card for demanding applications in broadcast such as production, on-air, and logging. Exacting specs, outstanding quality, absolute reliability and total connectivity make this new generation the number one choice for pro audio manufacturers and software vendors. The VX882e multichannel sound card shares the same features as the HR series and integrates seamlessly with the same professional audio software.

The Digigram VX882E Multichannel Sound Card is Visiblu ready: get connected to the world of distributed IP audio. A solution based on Visiblu, the Network Audio Operating System by Digigram, takes advantage of their power for low latency wide area network encoding and processing, whether they are located next door or hundreds of miles away.

Digigram VX882E Multichannel Sound Card Features:
-Analog and digital I/Os
-Up to 24-bit/192 kHz
-Comprehensive set of Windows drivers: Digigram np, WDM DirectSound (digitally signed by Microsoft), Wave, 
  ASIO
-High-quality hardware sample rate converters
-Compact design that fits in small PCs
-Optional breakout box
-Bus/Format: PCI EXPRESS (PCIe) x1 (x2, x4, x8, x16, x32 compatible)
-Size: 168 mm x 111 mm x 20 mm
-RAM: 512 kWords
-Power requirements(+3.3V / +12V): 2.5 A / 0.1 A
-Operating: temp / humidity(non-condensing): 0°C / +50°C • 5% / 90%
-Storage: temp / humidity(non-condensing): -5°C / +70°C • 0% / 95%
-Analog line inputs (mono): 8 balanced*
-Maximum input level/impedance: +24 dBu / >10 kΩ
-Digital inputs (stereo):
  -4 AES/EBU with** hw Sample Rate Converters,
  -7.5:1 to 1:8, up to 192 kHz
-Programmable input gain:
  -analog: from -94.5dB à +15.5 dB***
  -digital: from -110 dB à +18 dB
Other inputs:
  -AES/EBU Sync (up to 192 kHz),
  -Word Clock (up to 96 kHz), LTC, Video
-AES11 synchronization: Yes

  * can be used with unbalanced signals
  ** can be used as S/PDIF interface as well
  *** maximum sensitivity: 0 dBFs for -15.5 dBu input

-Analog line outputs (mono): 8 servo balanced ****
-Maximum output level /impedance: +24 dBu/ <100 Ω
-Digital outputs: 4 AES/EBU ****, up to 192 kHz
-Programmable output gain:
  -analog: from -86 dB to +24 dB
  -digital: from -110 dB to +18 dB
-Other outputs: Word clock (up to 96 kHz)

  **** electronically servo-balanced outputs provide automatic level adjustment to accommodate either balanced
          or unbalanced lines

-Internal connector: Inter-board Sync
-External connector: 68-pin SCSI MDR
-Digigram accessories available: Breakout cable or 2U 19" Breakout Box
-Sampling frequencies available: Programmable from 8 to 192 kHz
-Supported audio formats: PCM (8, 16, 24 bits), Float IEEE754
-Digigram management: np SDK (HR Runtime, PCM only)
-Other management: Wave, ASIO, and DirectSound (all PCM only)
-OS supported: Windows XP*, Windows 2003 Server*, Windows Vista*
-Main on-board processing features (with np SDK): PCM play, rec, Float IEEE754, direct monitoring, real-time mixing,
  level adjustment, panning, cross-fade, punch-in/punch-out, scrubbing

* 32-bit version


Digigram BOB8 Breakout Box

The Digigram BOB8 Breakout Box is an elegant, safe, and ergonomic solution to connect audio sources and destinations to Digigram's multichannel sound cards via a sturdy 2U 19" rack. All analog and digital inputs are available simultaneously on the front panel.

The Digigram BOB8 Breakout Box is the perfect match for the PCX882HR and VX882HR sound cards, but may also be used with other multichannel sound cards, such as the miXart 8 AES/EBU, via specific link cables. It also works with almost any multichannel Digigram PCI soundcard (does NOT work with the VX442).

Digigram BOB8 Breakout Box Features:
-4 analog and digital stereo inputs + 4 analog and digital stereo outputs available simoultaneously on the front panel
-AES synchronization, Word IN/OUT, Video IN, and LTC IN connectors
-Rugged mechanical design
-High quality Neutrix XLR, BNC, and RCA connectors 
-Digigram design, tested against EMC requirements
-Four mounting configurations: rack front end, rack back end, under a table, top of a table
-Compatible with all Digigram multichannel soundcard featuring the 62-pin D-Sub connector
-Connects with Digigram's miXart 8 range of multichannel sound cards via a specific link cable
-Optional label carrier sets(available direct from Digigram)