Boss DD7 Digital Delay Pedal

Available to United States customers only.

The Boss DD7 Digital Delay Pedal takes the best features from its predecessors and expands the creative potential with Modulation Delay mode, classic modeled Analog Delay mode, External pedal control options, longer delay time, and more.

Boss DD7 Digital Delay Pedal Features:
-Expanded delay time, up to 6.4 seconds
-Modulation Delay mode offers natural, chorus-type sounds
-Analog Delay mode models the classic warm BOSS DM-2 analog delay sound
-Tap tempo controllable via external footswitch
-Delay time, feedback, and effect level can be controlled via external Expression pedal (sold separately)
-Up to 40 seconds of recording for sound on sound (Hold mode)

Up to 6.4 seconds of delay time is available with the Boss DD7 Digital Delay Pedal, a marked increase from its predecessor. In addition, Hold mode allows up to 40 seconds of input to be recorded for creating “sound on sound” performances.  The DD7 is equipped with two innovative new delay modes. Modulation Delay provides chorus-flavored sounds. Analog Delay offers a modeled simulation of the classic Boss DM-2, beloved for its characteristic warmth. 

For hands-free control of the DD7, an external footswitch and Expression pedal (sold separately) can be used. Tap tempo can be controlled from an external footswitch, while delay time, feedback, and effect level can be changed on the fly via Expression pedal.  Create amazing effects with the Boss DD7 Digital Delay Pedal’s stereo output, such as spatial audio sweeps via true stereo panning. You can also use the stereo outputs to create separate dry and wet signal paths, handy for recording and live-performance control.

Boss DD7 Digital Delay Pedal Specifications*:
-Controls E.LEVEL, F.BACK, D.TIME, MODE, Pedal switch
-Indicator CHECK (Used for indication of TEMPO, HOLD, and to check battery)
-Connectors
  -INPUT-A (MONO) jack, INPUT-B jack
  -OUTPUT-A (MONO) jack, OUTPUT-B jack
  -TEMPO/EXP jack
  -AC adaptor jack (DC 9 V)
-Delay Time 1 ms to 6400 ms**
-Maximum recording time: 40 sec (in Hold mode)
-Nominal Input Level -20 dBu
-Input Impedance 1 M ohm
-Nominal Output Level -20 dBu
-Output Impedance 1 k ohm
-Recommended Load Impedance 10 ohms or greater
-Power Supply DC 9 V:
  -Dry battery 6F22 (9 V) type (carbon)
  -Dry battery 6LR61 (9 V) type (alkaline)
  -Current Draw 55 mA (DC 9 V)***
-Accessories
  -Owner's Manual
  -Mode Sticker
  -Application Sticker
  -Leaflets ("USING THE UNIT SAFELY," "IMPORTANT NOTES," and "Information")
  -Dry battery (9 V type, 6LR61) ****
-Width 73 mm (2-7/8 inches)
-Depth 129 mm (5-1/8 inches)
-Height 59 mm (2-3/8 inches)

*The specifications are subject to change without notice.
**Values may vary according to the mode and connections.
*** Expected battery life under continuous use: Carbon: 1.5 hours, Alkaline: 6 hours. These figures will vary depending on the actual
    conditions of use.
**** The battery that is supplied with the unit is for temporary use, intended primarily for testing the unit's operation. We recommend
    that alkaline battery be used when replacing the battery.