Presonus ACP88 Compressor Limiter Gate

The ACP88 gives you total dynamics control for multi-tracking and live sound reinforcement. Eight compressor/limiters deliver transparent dynamics control. Eight full featured gates seamlessly control unwanted noise and bleed-through. Control vocals, tame drums, protect speakers, tighten the low-end, all from just two rack spaces of powerful processing.

 Front Detail

-Presonus ACP88 Compressor Limiter Gate Features:
-Eight Full Featured Compressor/Limiters
-Eight Full Featured Gates
-Side Chain on Every Channel
-Trigger Inputs on Every Channel
-Balanced/Unbalanced I/O
-Comprehensive Linking via Unique Power Summing Bus
-Takes the Place of Multiple Processors
-Crystal Clear Compression & Gating for Multi-Tracking & Live Sound
-Allows Spectral Processing & Gate Keying via Separate Jacks
-+4/-10 Stereo Operating Level

 Rear Detail

Presonus ACP88 Compressor Limiter Gate Specifications:
-Number of Channels Eight
-Dynamic Range >115dB
-Signal to Noise Ratio >95dB
-Headroom
  - +24dBu, Unbalanced
  - +18dBu, Balanced
-Frequency Response 10Hz to 50kHz
-Crosstalk <82dB @10kHz
-Compression Threshold Range -40dBu to +20dBu
-Compression Ratio 1:1 to 20:1
-Compressor Attack Time 0.02ms to 200 ms
-Compressor Release Time 0.5ms to 500ms
-Auto Attack and Release Program Dependent
-Gate Threshold Range -70dBu to +20dBu
-Gate Attack Time 0.01ms to 100ms
-Gate Release Time 0.02ms to 2 sec
-Gate Attenuation Range -15dB or -60dB
-Input Impedance 10k Ohms
-Output Impedance 51 Ohms
-THD + Noise <0.02%
-Output Gain -20dB to +20dB
-Compression Curve Types Hard and Soft Knee
-Compression Metering Above/Below Threshold LED
-Gate Metering Open and Closed LED
-Sidechain Output Impedance 51 Ohms
-Sidechain Input Impedance 10k Ohms
-Internal Operation Level +4dBu=0dBu
-Input Range +4dBu or -10dBu
-Input Connectors 1/4" TRS, Balanced or Unbalanced
-Output Connectors 1/4" TRS, Balanced or Unbalanced
-Compressor Sidechain Connector 1/4" TRS
-Gate Sidechain Connector 1/4" TRS
-Power Supply Internal, Linear Supply (factory configured)
-Power Requirements 100V AC to 120V AC or 200V AC to 240V AC
-Power Connection IEC Receptacle
-Size 2U Rack
-Dimensions 19" x 3.5" x 7"